0 like 0 dislike
1 view
in Bilgi Teknolojileri by anonymous Bilge (165k points)
san switch bakcup and restore settings

3 Answers

0 like 0 dislike
by anonymous Bilge (165k points)

SSH ile console bağlandıktan sonra aşağıdaki örneği takip ederek yedek  alabilirsiniz.

DS300B:root> configupload 

Protocol (scp, ftp, sftp, local) [ftp]: scp

Do you want to continue with CRA (Y/N) [N]: 

Server Name or IP Address [host]: 10.10.10.40

User Name [user]: ah

Path/Filename [<home dir>/config.txt]: 

Section (all|chassis|switch [all]): all

kb@10.10.10.40's password: 

configUpload complete: All selected config parameters are uploaded

DS300B:root> 

0 like 0 dislike
by anonymous Bilge (165k points)

Restore  aşağıdaki adımları takip ediniz;

DS300B:root> configdownload 

Protocol (scp, ftp, sftp, local) [ftp]: scp

Do you want to continue with CRA (Y/N) [N]: 

Server Name or IP Address [host]: 10.10.10.40

User Name [user]: ah

Path/Filename [<home dir>/config.txt]: 

Section (all|chassis|switch [all]): all

                         *** CAUTION ***

  This command is used to download a backed-up configuration

  for a specific switch.  If using a file  from a  different

  switch, this file's configuration  settings will  override

  any current switch settings.   Downloading a configuration

  file, which was uploaded  from a different type of switch,

  may cause this switch to fail.

  A switch reboot is required for the changes to take effect.

  configDownload operation may take several minutes

  to complete for large files.

  Do you want to continue [y/n]: y

ah@10.10.10.40's password: 

duplicate license-key "RyRbdQeeQRSzScem"

duplicate license-key "YrFT4MEYt9KTJJGJtXGWtQXC7CrBDaA9BAfPA"

duplicate license-key "3QQCYE7LMXDGKgaaRr4gCaREgERJgKrSB7CYC"

Doing configDownload on switch ...

Activating configDownload without disabling switch: 

NOTE: Not all configuration parameters will be downloaded with switch online

With the supplied configuration data, the switch must first

be disabled, using the "switchDisable" command.

configDownload not permitted 

DS300B:root> 

0 like 0 dislike
by anonymous Bilge (165k points)
Not permitted gibi bir hata alırsanız bazı switch özelliklerini kapatmanız gerekir. Bunu için aşağıdaki örneği takip ediniz ve uygun gördüklerinizi kapatınız. Bu hatayı backup dönüşü alıyorsanız direk "switchDisable" komutunu kullanabilirsiniz.

DS300B:root> configure

Not all options will be available on an enabled switch.

To disable the switch, use the "switchDisable" command.

Configure...

  Fabric parameters (yes, y, no, n): [no] y

    WWN Based persistent PID (yes, y, no, n): [no]

    Location ID: (0..4) [0]

    Dynamic Portname (on, off): [off]

    Edge Hold Time(Low(80ms), Medium(220ms), High(500ms), UserDefined(80-500ms): (80..500) [220]

    Remote Fosexec feature: (on, off): [off]

    High Integrity Fabric Mode (yes, y, no, n): [no]

  D-Port Parameters (yes, y, no, n): [no]

  RDP Polling Cycle(hours)[0 = Disable Polling]: (0..24) [1]

  System services (yes, y, no, n): [no]

  ssl attributes (yes, y, no, n): [no]

  rpcd attributes (yes, y, no, n): [no]

  cfgload attributes (yes, y, no, n): [no]

  webtools attributes (yes, y, no, n): [no]
...